Alinco DJ-175T 144MHz Handheld Transceiver
Product Condition: New
One Year Manufacturer Warranty
Product Description
Alinco DJ-175T 144MHz Handheld Transceiver
Brand New
Alinco has created a new 2 meter HT that sets new standards in features, convenience and easy operation. The DJ-175 sports an alphanumeric display for easy memory management. It has an ergonomic design that's "user friendly" and the 5-watt output battery is standard. Be prepared for virtually any selective calling situation or gaining access to repeaters with 39-tone CTCSS, 104 DCS, Tone-bursts and DTMF encoding, all included at No extra costs. Best of all, DJ-175 retains the proud Alinco tradition of quality construction and excellent value.
Description
Scanning / 200 Memories
/ NiMH Battery / Backlit Display/Keypad / Encode/Decode / Tone Bursts / Wire
cloning capable / 5/2/0.5 W output
The Alinco DJ-175T sets new Standards in features, convenience and easy operation.
The DJ-175 sports an alphanumeric display for easy Memory management. It has
an Ergonomic design that is User friendly and the 5-watt Output Battery is standard.
Be prepared for virtually any selective calling situation or gaining access
to repeaters with 39-tone CTCSS, 104 DCS, Tone-bursts and DTMF encoding, all
included at no extra cost. Best of all, DJ-175 retains the proud Alinco tradition
of quality construction and excellent value. Enjoy extended receive coverage
from 136-173.995 MHz.
Each DJ-175T comes standard with: flexible SMA antenna, EBP-72 NIMH battery pack and EDC-146 wall Adapter and EDC-165 NiMH drop-in trickle charge stand.
Specifications:
Receiver System: Double Conversion Super-heterodyne
Channel Step: 5, 10, 12.5, 15, 20, 25, 30 kHz.
Memory Channels: 200 memory channels+ 1 call channel
Tone Encoder: 39 tone encoder standard
Deviation: ± 5 kHz
TX Output: 5/2/0.5 Watts
Frequency Stability: ± 5 PPM (-10 to +50° C.)
Sensitivity: Better than -15 dBu (12dB SINAD) at 145 MHz
Selectivity: ± 6 kHz -6dB
I.F.: 1st = 21.7 MHz, 2nd = 450 kHz
Power Supply Requirements: 7.2VDC via battery only
Current Consumption: TX: 1500 mA, RX: 250 mA, Standby 70, Batt Save: 30mA
Antenna Jack: SMA
Unit Dimensions: 2.28 x 4.23 x 1.43 inches; 8.7 oz without projections
This equipment has been tested and found to comply with the limits for
a Class B Digital device, pursuant to part 15 of the FCC Rules.
Features
Two-touch Repeater Access
200 Memory Channels plus 1 CALL channel
VFO, Memory and scan modes
Flexible antenna with SMA port
39 CTCSS tone squelch
1000, 1450, 1750 and 2100 Hz tone bursts
Wire-cloning feature
Three output levels, 5w / 2w / 0.5w
Specifications
TX: 144.000 - 147.995
RX: 136.000 - 173.995
Modes: F3E(FM) / F2D
Antenna Connector: 50ohm unbalanced SMA
Frequency Stability: +/- 2.5ppm
Power Supply Req: 7.2V Battery / External DC Port Not Available
Usable Temp Range: 14-113 F
Output Power: 5w / 2w / 0.5w
Spurious Emissions: -60dB or less
Specifications subject to change without notice or obligation. Specifications apply to Amateur Radio bands only. Permits required for MARS use. Product intended for use by properly licensed operators. Wide band receive related specification is for T-version only.800MHz cell-phones frequencies blocked on T version. RoHS compliant.
Please be sure to consult the rules that apply in your
county before you actually operate in the digital mode. This unit is neither
available nor intended for use where the import, sale or use of such devices
is prohibited by the government.